Magic GTX® Women

$ 299.00


The light mountaineering boot, compatible with strap-on crampons, at a very attractive price. It is equipped with Base Fit, Mammut's flagship patented footwear technology, and selected high-tech materials including Dropstop textile, Giardini, velours leather, rubber reinforcements and a GORE-TEX® Performance Comfort Footwear membrane. The asymmetric 3-zone lacing and good fit ensure personalized comfort and safety. The technical highlight is the newly developed 3-layer wedge made from Poro, PU and TPU.

Article Nr: 3010-00580
Weight for UK size 5.5 (per shoe): 688 
Ideal For:
  • Via Ferrata
  • Mountain Hiking
Suitable For:
  • Multipitch Rockclimbing


Characteristics / Features

Insulation: -20   °C
Flex index: B2 steigeisenfest   
Last index: Mountaineering   
Weight for UK size 5.5 (per shoe): 688   
  • High cut rubber edge
  • Asymmetric lacing
  • Crampon compatible B2
  • Board lasted
  • Individual 3-zone lacingPersonalized and adaptable binding
  • Free-sliding webbing transfers the power from the lacing area to the soleImproved support from the shoeEnhanced security and comfort
  • Constructed from a blend of supple inner and tough outer materials, which means the boot is hard only where necessary and can be designed to fit the foot for enhanced comfort.
  • Easy resoling


  • GORE-TEX Performance Comfort Footwear

    100% guaranteed waterproofnessGood breathability

  • Base Fit

    Free-sliding webbing transfers the power from the lacing area to the soleImproved support from the shoeEnhanced security and comfort

  • Dropstop Textil

    LightExtremely rip-proofHighly rub-proof

  • Hybrid-Shell

    Blend of supple inner and tough outer materialsEnhanced comfortImproved adaptability

  • 3 Zone lacing

    Individual 3-zone lacingPersonalized and adaptable binding

  • Asymmetric lacing

    Asymmetric lacingSnugger fit in the forefootAdapts to the foot’s anatomy

  • 3 Level wedge

    Three level wedge made from Poro, PU and TPU.


Material Leather 1

  • Velours Leather

    Velours leather, or suede leather, is obtained by an internal split of the hide/skin. Thanks to its rough surface structure it is highly abrasion resistant and breathable. Depending on the required finish, Velours leather can be waxed, brushed or left untreated.

Material Textile

  • Dropstop Textil

    This roughly woven Italian textile of 73% polyamide and 27% polyester is very light, extremely resistant to abrasion and rip-proof. Permanent waterproofing prevents excessive water absorption.

Inner Lining

  • GORE-TEX Performance Comfort Footwear

    100% guaranteed waterproof thanks to premium quality high-fitting, sealed, insert socks made of PTFC (PolyTetraFluorCarbone). The Performance version offers excellent breathability with average warming ability.

Soles :

  • vibram Maton Sole

    Very grippy mountaineering and backpacking sole with medium tread depth Climbing-Zone Easy resoling

Care Instructions

Shoes must be protected from water, wet conditions and dirt. Since wet conditions and dirt affect leather's natural properties, such as temperature control and comfort, shoe care is a very important area.


  • Use a brush to remove any dirt, or brush the shoe under running water to remove persistent soiling
  • Leather cleaning products are not recommended since the soap damages the waterproofing treatment
  • After cleaning the shoes, rub in the appropriate wax or silicone-based care products or polish them using a soft brush
  • Dry leather needs nutrients in the form of wax (no grease or oil). Apply a very thin layer and then work into the leather
  • The application of wax makes nubuk or velours leather appear darker and smoother. Liquid care products maintain the leather's original appearance for longer, but provide fewer nutrients
  • The best way to clean the lining (textile, GORE-TEX® and leather) is using lots of cold water and a sponge. The lining retains high quantities of salt from perspiration. In the long term, these can have a damaging effect on textiles and leather lining materials.


  • A waterproofing treatment should be applied regularly to footwear. We recommend sprays without fluorcarbone, the surrounding says thank you!
  • Waterproofing treatments work best when applied immediately after cleaning, once the shoe is completely dry. To ensure maximum performance, we recommended reapplying a waterproofing treatment the day before a tour.
  • Waterproofing is important to keep your feet dry. Leather or textiles saturated with dirt and water are no longer able to breathe, resulting in increased perspiration.
  • To achieve optimal resistance to water and dirt, the waterproofing treatment should be applied to clean and dry leather. Clean the shoes first.
  • The waterproofing treatment can be applied as soon as the leather is completely dry.
  • Spray the shoes thoroughly in a well-ventilated room or in the open air, using slow and even movements, from a distance of around 20 cm.
  • Wait until the shoes are completely dry before wearing them. 100 percent protection will be achieved after around 24 hours.


If leather is not cared for regularly, it becomes hard and brittle and its appearance suffers. Shoe care is important to prevent this. This makes the leather pliant, flexible and keeps it looking good. Regular care also prevents the appearance of small cracks.

  • Remove shoelaces and insoles.
  • Carefully remove dirt from the shoes using a brush. For persistent soiling, you can also brush the shoes under running water. Do not use any cleaning products. Soap damages leather.
  • Stuff cleaned leather shoes with newspaper, and change the newspaper regularly. This helps them to dry faster. (N.B. GORE TEX-lined shoes dry better without any newspaper inside them)
  • Wait until the leather is completely dry, before treating them.

Freshening up

Our feet can be encased in our shoes for up to 16 hours during long hikes, bicycle tours or a long working day. Sweat accumulates in socks and shoes. The comforting warmth of this enclosed damp environment creates the ideal breeding ground for germs. Regular application of freshening products helps to keep the inside of your shoes fresh and clean.


If stored properly, a shoe retains its shape and function for a longer period. Never store shoes when they are wet or dirty. This makes the leather brittle.

  • After wearing, store shoes with tongues fully open and insoles removed in a shady, dry and well-ventilated area
  • Shoe trees should always be placed in dry shoes before storage
  • Never store shoes when they are wet, or in poorly ventilated places, such as in a car, a plastic bag or a cellar
  • Do not dry near a source of heat (fire, hot stove, etc.)
  • Shoes with leather linings can be stuffed with newspaper. Shoes with a GORE-TEX lining dry faster without any newspaper inside

Sizing Chart

All shoe sizes are shown in UK sizes.

3.5365.04.5220 (2.0) 220 (2.0)
436 2/35.55.0225 (2.0) 225 (2.0)
4.537 1/36.05.5230 (2.0) 230 (2.0)
5386.56.0235 (2.0) 235 (2.0)
5.538 2/37.06.5240 (2.0) 240 (2.0)
639 1/37.57.0245 (2.0)245 (2.5)245 (2.0)
6.5408.07.5250 (2.0)250 (2.5)250 (2.0)
740 2/38.58.0255 (2.0)255 (2.5)255 (2.0)
7.541 1/39.08.5260 (2.0)260 (2.5)260 (2.0)
8429.59.0265 (2.0)265 (2.5)265 (2.0)
8.542 2/310.09.5270 (2.0)270 (2.5)270 (2.5)
943 1/310.510.0275 (2.0)275 (2.5)275 (2.5)
9.54411.010.5 280 (2.5)280 (2.5)
1044 2/311.511.0 285 (2.5)285 (2.5)
10.545 1/312.011.5 290 (2.5)290 (2.5)
114612.512.0 295 (2.5)295 (2.5)
11.546 2/313.012.5 300 (2.5)300 (2.5)
1247 1/313.513.0 305 (2.5)305 (2.5)
12.54814.013.5 310 (2.5)310 (2.5)
1348 2/314.514.0 315 (2.5)315 (2.5)
13.549 1/315.014.5 320 (2.5)320 (2.5)


You may also like

    Show more products