Dealer search
PULSE firmware
PULSE Firmware with two user profiles [Basic / Advanced]
The PULSE firmware implements the following functions in addition to the existing basic functions of the firmware 3.0, which remain unchanged.
PULSE Firmware 3.2
- Acoustic search guidance
- Rescue-SEND
- Lithium battery mode
- LCD contrast setting
Acoustic search guidance
Acoustic search guidance assists the user during the search phase by means of a patented tone sequence that increases in volume and frequency depending on the distance and direction from the buried device.
Rescue-SEND
As a NEW feature, rescuers who are not involved in the active search can now set their device to “sleep mode”.
When “Rescue-SEND” mode is activated, the device does not transmit any 457 kHz signal and therefore does not disturb the searchers on the avalanche deposit – if no movement is detected after 4 minutes by the movement sensor, the device automatically switches back to “Send” mode.
For helpers who are not working in “SEARCH” mode with their device, in the event of a subsequent avalanche, the “Rescue-SEND” function ensures that the device transmits again and the victims can be located.
LCD contrast setting
This allows the user to adjust the device display to the prevailing light conditions in the area.
Lithium battery mode
The PULSE firmware now allows you to use lithium batteries as the energy source in the PULSE Barryvox. Lithium batteries discharge better at low temperatures and have a longer battery life.
Firmware 3.0
User profile
- «BASIC» profile, easiest digital search for casual users
- «ADVANCED» profile, analog and digital search modes offer customized settings
Increased range
- Increased receiving range on Y-axis
More effective search functions
- Dynamic pinpointing display
- Numbering of marked buried subjects
- Acoustic signal from primary through secondary search
- Protection against accidental switching from SEARCH to SEND
- Distance numbers are lager and smaller for a better readability
- Acoustic feedback when SEND mode is activated
"BASIC" user profile
- Digital mode only
- Overview of number of victims
- The device always searches for the strongest signal, no manual selection of victims is possible
- Marking of located victims
- Numbering of marked victims
- Digital search tone depending on distance
- Left and right buttons with the same function
 |
|
 |
Dynamic |
 |
Left and right buttons with the same function |
 |
Numbering of marked victims |
"ADVANCED" user profile
- Digital and analogue mode
- Overview of distance, direction and number of victims
- Option of scrolling and selecting victims
- Manual selection of victims based on distance and probability of survival
- Marking of located victims
- Numbering of marked victims
- Analogue search using acoustic signal playback
(analogue mode with manual adjustment of receiver sensitivity)
 |
Display of vital data |
 |
Dynamic |
 |
Manual selection of victims |
 |
Numbering of marked victims |
